Page 5
New upholstery and 04 F225's. After having issues with previous 261 with brackets and steep ramps submerging the motors during loading and unloading from the trailer I choose to go with a 30 inch shafts. This caused me much heartache. While it resolved the issue with the waterline coming over the exhaust ports it created much drag from the lower units being to low in the water even when set at highest setting. Bob's Machine brackets were installed to offset the height needed.
Complete redesign of the console was completed. Used a single sheet of acrylic to cover and install gauges. Raymarine 1260 color machine, Raymarne c80, Raytheon ST5000 Autopilot, Navman GPS and full Yamaha gauge package.
Electronic teleflex controls were added for throttle and shifter.
Complete new switchbox was installed with fuse breakers. Dive racks, gun racks, rub rail added.
