Page 18
Lot's of fairing going on. Here's some pix's of the boat and close up of what the System 3 Quik Fair looks like. It sands easy, spreads easy, no pinholes and yes it is a 2 to1 epoxy. In a comparison, all of those panels on the inside that you see were laid down in about 1 1/2 hrs work. A lot less than if I was mixing epoxy and adding microballons/cabosil to it.
Here's the steering wheel. It is a SeaChoice. It looks just like a Edison knock off. I had the guy pull one from stock and answer a few questions I had about it. It is better than I even thought it would be.
Today I made a Bonsi run to close to Bay St Louis, Ms. and picked up the engine bracket.
